Articles

{tab=User Guides|teal}

{niftycolumnbackground|teal}

Secure your Wi-Fi Modem. For Details  Click here 

Configure your E-mail. For Details click here

Configure Static IP

  • static IP Configuration for Sem INDIA Router. For Details click here.
  • static IP Configuration for New UT Star Modem.  For Details click here.
  • static IP Configuration for D-link Modem. For Details click here.
  • static IP Configuration for UT Star Modem. For Details click here.
  • Multiple static IP Configuration. For Details click here.

Configure CPE Modem

  • Sem INDIA CPE Modem Configuration. For Details clilck here.
  • HUWAEI CPE Modem Configuration. For Details clilck here.
  • New UT Star CPE Modem Configuration. For Details clilck here.
  • UT Star  Modem Configuration. For Details clilck here.
  • D-link  CPE Modem Configuration. For Details clilck here.
  • UT Star UT-304R2U  CPE Modem Configuration. For Details clilck here.
  • UT Star  Wireless Type- II & IV/Beetel Type A 410TC1 and wireless type-B 450 TC1/ type-c 480TC1  CPE Modem Configuration. For Details clilck here.
  • User Guide for Binatone DM 856W ADSL CPE Internet and Wireless configuration.For Details click here.

Configure CCTV IP Camera. For Details click here.

Configure LAN Setting for Windows Vista. For Details click here

Configure LAN Setting for linux. For Details click here

Steps of IP configuration for MAC OS. For Details click here

{/niftycolumn}

 

{tab=know Your Triband | teal}

{niftycolumnbackground|teal}

                                                         Important Tips

  1. Switch off CPE when not in use. 
  2. To avail Unlimited Free Internet Usage during night (00.00 hrs to 08.00 Hrs) in TriB 590NU Plan Switch ON CPE during Night after 00.00 hrs and ensure disconnection before 08.00 hrs.
  3. In case of power off/on CPE, please wait for 2-3 min before connecting to Internet
  4. Do not use any other power adaptor than the one supplied with CPE
  5. Don’t use the ‘Restore Factory Default Setting’ option in the CPE 
  6. Keep TCP/IP Properties settings in your PC as Obtain IP automatically and DNS Server Address as : Preferred DNS (Primary) 203.94.227.70 and Alternate DNS (Secondary) : 203.94.243.70
  7. The splitter provided should be connected at the entering point of 2-wire Tel cable of MTNL. Additional Extension /Phone if any shall be connected only after splitter.
  8. The Phone, DSL and line (MTNL Tel 2-wire) shall be connected to splitter as per marking on the Splitter supplied with CPE
  9. In case USB port is used, ensure CPE USB driver is installed on PC before connecting the USB cable
  10. In case of problem to connect to Internet check the following LEDs Status on the ADSL Router/CPE 
  11. DSL_TRIB_T10 (Times based plan) customers should switch OFF the modem when not in use to avoid time-based billing of idle modem (ON) time. 

{niftynextcolumn|teal}

For Normal Operation, the following 4 LEDs will glow

D-Link

UT star(300R2U)

Power LED

Solid Green

Red.

 

Blinking

Yellow

ADSL Link/Act

Solid Green

Green (Fast Blinking during activity)

*Ethernet Link/Act Or, *USB Link/Act

Solid/Blinking during activity.

Green- when Ethernet connected Red-when USB  connected
Orange-when Ethernet and USB both connected.

Note: In case Browsing Problem persists even after the indication of Normal Operation shown above by LEDs then make CPE Power off and then Power ON and please wait for 2-3 mins before connecting to Internet.

 {/niftycolumn}

{niftycolumnbackground|teal}

 

D-Link Reason
Power LED Off Power supply/adaptor faulty.
Status  LED Off CPE Faulty
ADSL Link/Act (i) Off

(ii) Slow blinking

Line Connection not established may be due Tel. line problem or splitter problem
*Ethernet Link/Act Or, *USB Link/Act Off Ethernet/USB not connected properly

 

{niftynextcolumn|teal}

 

UT star(300R2U)

Reason
Power LED Off Power supply/adaptor faulty.
Link  LED (i) Off

(ii) Fast blinking

Line Connection not established may be due Tel. line problem or splitter problem.
Data Off Modem is not transmitting/receiving data. May be due to user/password not authenticated or May be CPE faulty.
PC/USB Off Ethernet/USB not connected properly

{/niftycolumn}

*Depending upon Ethernet or USB port used for connecting PC.

Ensure that only one LAN Connection is Enabled in ‘Network Connections’ in your PC.

 

{tab=Change Password | teal}

  • Change your broadband password at our Web-Self Care Website http://register.mtnl.net.in
  • The password has to be changed in your ADSL router/ Modem (CPE) - Open the Web page, http://192.168.1.1 from your own broadband connection to login into your ADSL Router/ADSL CPE(CPE). Refer Modem user guide for further instructions.

{tab=Usage on SMS | teal}

Now check monthly usage of your MTNL TriBand prepaid / postpaid account on SMS for FREE.

The SMS service can be availed from Dolphin/Trump mobile numbers only. Using this service customers can keep track of their monthly download/usage of the broadband account. To avail this facility the MTNL broadband customers need to register their Dolphin/Trump mobile number in their respective TriBand account at the website http://register.mtnl.net.in and send an sms to 58708.

To check TriBand usage:

Send SMS "BBUSAGE " to "58708".

for e.g. send sms "BBUSAGE 12345678" to 58708

Triband users having username with suffix as @a (like 23236666@a), send sms "BBUSAGE @a" to 58708.

for e.g. send sms "BBUSAGE 23236666@a" to 58708

 

To register your Dolphin/Trump mobile numbers:

Go to website http://register.mtnl.net.in

Login with your username and password.

Click on "Update your mobile number" link.

Triband users having username with suffix as @a -

Go to website http://register.mtnl.net.in

Click "Triband users having username with suffix as @a (like 23236666@a)"

Update your profile.

Disclaimer:-For usage indicated in SMS is only for indicative purpose. Please refer http://register.mtnl.net.in for exact usage.