Know YourTriband

 Important Tips

1. Switch off CPE when not in use. 
2. To avail Unlimited Free Internet Usage during the night (00.00 hrs to 08.00 Hrs) in TriB 590NU Plan Switch ON CPE during Night after 00.00 hrs and ensure disconnection before 08.00 hrs.
3. In case of power off/on CPE, please wait for 2-3 min before connecting to the Internet
4. Do not use any other power adaptor than the one supplied with CPE
5. Don’t use the ‘Restore Factory Default Setting’ option in the CPE 
6. Keep TCP/IP Properties settings in your PC as Obtain IP automatically and DNS Server Address as Preferred DNS (Primary) 59.185.3.10 and Alternate DNS (Secondary) 59.185.3.11
7. The splitter provided should be connected at the entering point of 2-wire Tel cable of MTNL. Additional Extension /Phone if any shall be connected only after the splitter.
8. The Phone, DSL Modem/Router, and Tel line  shall be connected to splitter as per marking/Signwriting on the Splitter supplied with CPE
9. In case a USB port is used, ensure CPE USB driver is installed on PC before connecting the USB cable
10. DSL_TRIB_T10 (Times based plan) customers should switch OFF the modem when not in use to avoid time-based billing of idle modem (ON) time.  

Change Password

How to Change Password for Your Broadband Connection (Username)

Change of Password for your username is a two steps process. In step I, you have to change the password for your account at our Web-Self Care Website http://register.mtnl.net.in  and then, in Step II, the password has to be changed in your ADSL router/ Modem (CPE).

STEP I- Change of Password at our Web-Self Care Website.

•   Log on to our Web-Self Care Website http://register.mtnl.net.in
•   Click on Check Broadband Usage.
•   Enter Username, Password in the given fields. (Please enter the username as configured in Router)
•   Click on Login  Next window will be displayed. Go to tab  Change Password.
  
•   Enter an Old password, New Password, Confirm New Password in the given fields.
•   Click on submit   “Password is changed successfully for the account “ message will appear.
•   Click on Logout
  
  

Please note: You can log in again with new Password to verify it.

STEP-II: Change of Password in CPE/ ADSL Router

Pl. note: The password has to be changed in your ADSL router/ Modem (CPE) - Open the Web page, http://192.168.1.1 from your own broadband connection to login into your ADSL Router/ADSL CPE(CPE). Refer Modem user guide for further instructions.

                (Demo forBeenatone modem Model No. DM 856W as an example)

1. Open Website http://192.168.1.1 from your own broadband connection to login into your ADSL Router/Modem(CPE).
2. Logon using user name as admin and Password as the available rear side of Beenatone modem ) in other modems it may be as admin.
3. Click on the Interface Setup tab.
4. Scroll to PPPoE/PPPoA which appears at the left side of the window option.
5. Delete the previous password appearing in the Password field and enter the new password. Click on the Save button at the bottom of the page.
6. At the top of the screen, select Maintenance Tab and click on  SysRestart Tab.
7. Click on the Restart button for System restart with current settings (radio button must be on).
8. A message “The system is restarting. Please wait….” will appear.
9.  The page for username and password will appear. Enter User Name as admin and password as available on the rear side of Beenatone modem (in other modems it may be as admin) and Click on OK
10. At this time, ‘Page can not be displayed’ message will appear on the web page and the ADSL Lamp on your ADSL router/Modem (CPE) will go off. Close the Internet Explorer/ Internet Browser.
11. Wait till ADSL Lamp on the ADSL router glows again and become stable. This takes around 30-60 Secs.
12. Click on Internet explorer/ your browser and browse the Internet. This confirms that the password for your account has been changed successfully.